Double Edger

High precision: The plank remains stationary on the table, while the sawhead travels back and forth. Two pressure rollers in front and behind of the saw blades hold the wood in place with downward pressure during the cutting process. This new manufacturing process is unique to the market and guarantees an exact, parallel and straight cut.

Space-saving: The plank remains stationary on the table and is not pushed through longitudinally.

Maximum efficiency: The power consumption of the circular saw motors is constantly monitored and automatically adjusted to the optimum feeding rate.

Easy operation: Each individual plank is aligned using cross chains at the zero line by means of a laser guide. The second movable saw blade is subsequently adjusted to ensure that the maximum yield is achieved. A desired measurement can also be set at the control panel. The lateral fence, adjustable from 3 to 15cm, facilitate slat cutting.

One-Man operation: The infeed and discharge is performed from laterally and is operated by only one person. The operation of conventional double edgers, in which the plank needs to be pushed through, requires one person at the infeed end and another at the outfeed end.

No suction unit is required: Due to the rotation speed of the saw blade, the wood shavings and sawdust are propelled into a collection box. This box is emptied every time the end position is reached.

Technical data

	Typ	DB 65	DB100
S	max. passage height	65	100	mm
	max. passage width	850	850	mm
	* Standard cutting lengths	4.4 – 5.2 – 6.2	4.4 – 5.2 – 6.2	m
	max. distance of saw blades	500	500	mm
	min. distance of saw blades	70	70	mm
	Saw blade diameter	300	400	mm
	Feed rate	0 - 90	0 - 90	m/min
	Electric motor of circular saw blade	2 x 4.6	2 x 7.5 - 9.2	kW
B	Total width	1,500	1,700	mm
GH	Total height	1,550	1,700	mm
	Total weight depending on cutting length	from 2,500	from 3,000	kg

*Special lengths available on request